English (United Kingdom)Russian (CIS)

Miniature capacitive apparatus with mixing devices

Малогабаритные емкостные аппараты с перемешивающими устройствами Miniature capacitive apparatus with mixing devices used for storing, mixing, heat and mass transfer and chemical reactions in production environments, the main component of which is liquid.

The variety of designs of capacitive devices, due to a large number of designs of parts and their combinations, allows to take into account the specific features of the process and customer requirements.

WORKING ENVIRONMENTS: neutral, aggressive, flammable, explosive, toxic liquids, emulsions, suspensions or gas-liquid mixture with a volume concentration of solid phase is not more than 30%;

dynamic viscosity of not more than 5 Pa.s;

density not exceeding 2000 kg / m2;

temperature of minus 30 to plus 250°С.

HEATERS - plumbing or cooling water, condensate, brine, steam, organic fluids with temperatures ranging from minus 30 to plus 250 °C.

Capacity of shell storage equipment -0.01, 0.025, 0.04, 0.063, 0.1, 0.16, 0.25, 0.4, 0.63 m3

Acceptable pressure (relative, at a wall temperature of 20 °C):

in the case of capacitive device with elliptical head and elliptical or flat removable lid: excess - not more than 0.6 MPa (6 kgf / cm), residual (vacuum) - not less than 0.67 kPa (5 mmHg) in depending on the type of shaft seal of the mixing device;

in the case of capacitive equipment with a flat head and flat removable lid - air (filling);

in the heat exchange device: a smooth weld shirt excessive - more than 0.4 MPa (4 kgf / cm2) in the coil gauge - no more than 1.6 MPa (16 kgf / cm2).

Acceptable excess pressure in the casing and heat exchanger at maximum wall temperature is set on the basis of calculation for strength.

Material execution of Vessels - steel grades and St3sp 12Kh18N10T depending on the composition of the working environment and mode of the apparatus.

TEMPERATURE - Temperature range limits the housing wall and the heat exchange unit from minus 30 to plus 250 ° C. Allowable wall temperature depends on the type of material and heat exchange device housing and shaft seal type mixer.